Netti Dynamic AdaptPro Wheelchair
Dynamic to accommodate Spasms
A wheelchair that moves with the occupant
If you’re looking for a full dynamic wheelchair for someone with symptoms like total extension spasms or involuntary hip/back motions, this is the wheelchair to consider. Unique innovations allow a wheelchair that is exceptionally sturdy, small, and simple to move.
The Netti Dynamic AdaptPro is a fully dynamic wheelchair that moves with the user.
- Dynamic back and seat unit
- Optional dynamic leg supports and head support
- 20% lower peak pressure
- Dynamic setup in its entirety
- Seat height is low
- Very manoeuvrable and steady
- Design solutions with patents
- Comfort and stability are prioritised.
- The turning radius starts at 500 mm (without leg supports)
- This wheelchair may be configured in a variety of ways; for more information, go here.
Visit the Mobility Hub in Auckland to try out a Netti AdaptPro Wheelchair. Morton & Perry also provides wheelchair delivery around Auckland and NZ wide.
PRICE ON APPLICATION
Dynamic back support
Supporting the user’s back in the original position when tone decreases, and helps the user maintain the optimum seating position, prevents sliding and shearing and lowers the need for repositioning.
Dynamic leg supports
The user’s movements will be supported throughout the movements and when tone decreases, the lower extremities are guided back to their resting position.
The leg supports accommodate the extension movement in the knee joint and supports the pushing movements along the tibial axle and the flexion-extension movements of the feet.
Dynamic head support
The Netti Dynamic head support will adjust to the head and neck movements of the user. The stress on the back and neck of the user is reduced.
Dynamic seat unit
The dynamic seat unit allows for hip extension and the user is guided back to the original seating position. In this way, we reduce shear and pressure forces, which are some of the main factors causing pressure injury.
The Netti AdaptPro
Seat width | 350, 380, 400, 430, 450 mm |
Seat depth (adjustable in 25 mm steps) | 350 - 400 = 355 - 455 / 430 - 450 = 405 - 505 mm |
Back height possibilities range | 515 - 625 mm |
Seat height range measured to seatplate | 417 (447) mm |
Weight of wheelchair without cushions | 51 kg |
Max. load | 135 kg |
Max. load for car transport | 135 kg |
Tilt angle | 0° - +30° |
Recline angle | 87° - 133° |
Width added to seat width with standard wheels | 232 mm |
Total length with standard leg supports | 1280 mm |
Leg support length with standard leg support | 450 - 550 (350 - 450) mm |
Arm support height (from seatplate to armpad) | 265-377 mm |
Dynamic back support
Supporting the user’s back in the original position when tone decreases, and helps the user maintain the optimum seating position, prevents sliding and shearing and lowers the need for repositioning.
Dynamic leg supports
The user’s movements will be supported throughout the movements and when tone decreases, the lower extremities are guided back to their resting position.
The leg supports accommodate the extension movement in the knee joint and supports the pushing movements along the tibial axle and the flexion-extension movements of the feet.
Dynamic head support
The Netti Dynamic head support will adjust to the head and neck movements of the user. The stress on the back and neck of the user is reduced.
Dynamic seat unit
The dynamic seat unit allows for hip extension and the user is guided back to the original seating position. In this way, we reduce shear and pressure forces, which are some of the main factors causing pressure injury.
The Netti AdaptPro
Seat width | 350, 380, 400, 430, 450 mm |
Seat depth (adjustable in 25 mm steps) | 350 - 400 = 355 - 455 / 430 - 450 = 405 - 505 mm |
Back height possibilities range | 515 - 625 mm |
Seat height range measured to seatplate | 417 (447) mm |
Weight of wheelchair without cushions | 51 kg |
Max. load | 135 kg |
Max. load for car transport | 135 kg |
Tilt angle | 0° - +30° |
Recline angle | 87° - 133° |
Width added to seat width with standard wheels | 232 mm |
Total length with standard leg supports | 1280 mm |
Leg support length with standard leg support | 450 - 550 (350 - 450) mm |
Arm support height (from seatplate to armpad) | 265-377 mm |