Nxt Optima Carbon Backrest
Carbon Thoracic Back Support For Wheelchair
Back support for wheelchair users with an active lifestyle that wish to keep the total weight of their wheelchair down without sacrificing material strength or performance.
Nxt Optima wheelchair backrest is available in a low and high model. Both provide good thoracic support and pelvic positioning.
Available in (width x height):
35×23, 35×33 cm / 14×9, 14×13 inches
38×23, 38×33, 40×23, 40×33, 40×40 cm / 15×9, 15×13, 16×9, 16×13, 16×16 inches
43×23, 43×33 cm / 17×9, 17×13 inches
46×23, 46×33, 46×40 cm / 18×9, 18×13, 18×16 inches
51×33, 51×40 cm / 20×13, 20×16 inches
MOH Enable Panel – Band 2 Approved
Designed and Manufactured in Canada
This product qualifies for Ministry of Health & ACC funding.
Find out morePRICE ON APPLICATION

QuickFit Mounting System
Quickly and easily adjust while client is in the chair. Brackets are reversable to create an increased seat depth. Install or remove clamps without taking them apart.

Light and Rigid
One-piece ultra-light carbon fiber shell. Manufactured from T700 high-modulus carbon fiber, the lightest and most rigid available.

Lateral Contours
The Lateral contours are higher, targeting better support in the thoracic region while maintaining optimal pelvic positioning.

Dual Density Foam
Dual density foam back cushion with washable antimicrobial spacer mesh cover.
Nxt Optima Carbon Backrest
Quick Fit Mounting System
Used for | Active user. Thoracic support & pelvic positioning |
Cushion material composition | Dual density foams |
Supplied with back-shell | Yes, 1 section Lightweight carbon |
Quick release backshell | Yes, one hand quick release for removal |
Adjustable Back Angle | 25° Anterior. 25° Posterior |
Available Sizes (width x height) | Click the COMPARE button above to view all sizes and product codes |

QuickFit Mounting System
Quickly and easily adjust while client is in the chair. Brackets are reversable to create an increased seat depth. Install or remove clamps without taking them apart.

Light and Rigid
One-piece ultra-light carbon fiber shell. Manufactured from T700 high-modulus carbon fiber, the lightest and most rigid available.

Lateral Contours
The Lateral contours are higher, targeting better support in the thoracic region while maintaining optimal pelvic positioning.

Dual Density Foam
Dual density foam back cushion with washable antimicrobial spacer mesh cover.
Nxt Optima Carbon Backrest
Quick Fit Mounting System
Used for | Active user. Thoracic support & pelvic positioning |
Cushion material composition | Dual density foams |
Supplied with back-shell | Yes, 1 section Lightweight carbon |
Quick release backshell | Yes, one hand quick release for removal |
Adjustable Back Angle | 25° Anterior. 25° Posterior |
Available Sizes (width x height) | Click the COMPARE button above to view all sizes and product codes |